Brief description of the process of squeezing FRP

The untwist yarn ball is mounted on the yarn frame, and the open roll bundle passes through a series of guide rollers and cluster gate rollers, before entering the resin impregnated rubber groove to soak the resin. The yarn bundle then passes through a preformed mold, which is a guide device configured according to the sectional shape required by the product. Remove the excess resin and bubbles into the cold mold. The cold mold is cooled with cooling water to increase the resin viscosity, reduce the loss, and finally enter the forming mold, so that the fiber reinforcing material and resin are formed and solidified in the mold, and then pulled out by the traction device, and cut into the products of the required length through the cutting device.