The structural advantages of the grate make it easy to maintain and replace

According to waste with different calorific values, different air volumes are allocated to supply combustion air. At the same time, the drive of each section of the grate can be controlled independently, which is convenient for the individual control of the feeding volume and air volume of different combustion areas. There is an overlapping structure between each row of grate pieces, garbage will not leak from adjacent grate blocks, and there is almost no friction between the same row of grate pieces; elastic wear-resistant scrapers are set on the front of the grate pieces , Reduce wear and improve the service life of the grate. The bottom surface of the grate is equipped with a cooling steel sheet, which makes the cooling effect of the primary air good, and the grate is hardly burned.
The structure and movement of the grate are simple, not easy to jam, and the failure rate is low, which saves a lot of repair and maintenance costs. The grate pieces are replaced from the fourth year, and the annual replacement rate is below 2%. The modular structure of the furnace section is conducive to road transportation and on-site installation. It can be completely assembled in the workshop and improve the accuracy required for on-site installation.