Qingyun Hongsheng Machinery Parts Co., Ltd. is one of the most reliable manufacturers and suppliers of wear-resistant ceramic patch tube in China. We warmly welcome you to wholesale high quality wear-resistant ceramic patch tube at low price from our factory. If you have any enquiry about quotation, please feel free to email us.
Wear-resistant ceramic patch tube
Patch wear-resistant ceramic pipe is to paste aluminum oxide ceramic sheet on the inner wall of the pipe, and forms a firm anti-wear layer. The production process of this product is relatively simple, the production cycle is short, and the cost is relatively low.
The ceramic patch is a square patch which effectively prevents the side of the square patch is divided into two parts along the center line, respectively having A inclined plane A, inclined plane B, the opposite side of the side is divided into two parts, respectively having a inclined plane C, slope plane D, the inclined plane C, inclined plane D, and the slope plane A with the inclined plane C, slope plane B and the inclined side D; the other parallel sides have the corresponding V-shaped projection and V-shaped grooves. It can solve the problems existing in the above existing technology, and the adjacent ceramic patches bite into each other, effectively prevent the shedding, and reduce the installation workload.
Product features:
1, wear resistance: the alumina content in the wear-resistant ceramic sheet is more than 92%, the hardness is HRA 85, its wear resistance is ten times higher than the quenching carbon steel, better than tungsten cobalt carbide;
2, corrosion resistance: wear-resistant ceramic sheet and inorganic adhesive chemical performance is stable, can resist all kinds of inorganic acids, organic acids, organic solvents, etc., its corrosion resistance degree is more than ten times that of stainless steel;
3, medium and high temperature resistance: the ceramic layer is dense corundum, its expansion coefficient of 6-8 * 10-6 / ℃, excellent heat resistance, can run in 350℃ for a long time, the general working conditions can be met;
4, the inner wall is smooth, the air flow is smooth, not scaling does not block the material: the smooth surface so that the material can pass freely without hanging and blocking the material.
5, easy to install, save cost: ceramic density 3.8-3.97g/cm³, 1 / 3 lighter than ordinary pipeline, easy to carry, save manpower, install easier, more quickly, can easily set up the pipeline higher, while reducing the load of support and hanger equipment, save material cost:
6, reduce maintenance: super wear resistance to greatly reduce the frequency of maintenance, save cost and labor
7, the wrong joint paste: advanced paste technology, along the medium flow by using the wrong joint paste method, to avoid the formation of grooves and cracks along the wind direction.
Hot Tags: wear-resistant ceramic patch tube, China wear-resistant ceramic patch tube manufacturers, suppliers, factory, Heat Wear Resistant Ceramic Lined Pipe Elbow, Wear Abrasion Resistant Alumina Ceramic Pipe Bend Elbow, Steel Plant 95 Alumina Ceramic Lined Elbow, Abrasion Resistant Ceramic Lined Steel Pipe And Elbow, Ceramic Lined Wear Resisting Elbow, The Ceramic Lined Carbon Steel Pipe
