Qingyun Hongsheng Machinery Parts Co., Ltd. is one of the most reliable manufacturers and suppliers of clinker crusher hammer in China. We warmly welcome you to wholesale high quality clinker crusher hammer at low price from our factory. If you have any enquiry about quotation, please feel free to email us.
Forging crusher hammer head is suitable for crushing pebbles, coal gangue, limestone, etc. Forging crusher hammer using high quality train wheel hub steel (material 65 Mn, good impact resistance, strong toughness, good wear resistance, not easy to break) using forging machinery for metal billet repeatedly, make its deformation to obtain certain mechanical properties, certain shape and size, after special quenching heat treatment method, ensure the hammer working area get high hardness, high wear resistance. By forging, it can eliminate the defects such as loose casting in the smelting process of metal, and optimize the microstructure. At the same time, due to the complete metal streamline, the mechanical performance of the forging is generally better than the casting. Forged hammer head because of the cheap price, economic and durable and other characteristics favored by the majority of users.
Performance Characteristics
1. The impact force on the material increases. Because the center of gravity of the hammer head of the hammer crusher is moving radially upward at the rotary radius, the speed of the hammer head increases. The impact work of the hammer head of the hammer crusher on the material is increased, thus improving the crushing effect.
2. The effective wear amount of the hammer head of the hammer crusher has increased. The single weight of the hammer head is generally calculated by 27 kg, and the effective wear amount accounts for one third, namely 9 kg. The total weight change of the improved structure is small, and the effective wear amount is 16 kg. The improved set of hammer heads is equivalent to the two sets before the improvement, reducing the use cost.
3. Reduce the discharge particle size and improve the table-time yield. After improvement, the length of the suspension hole to the hammer head is from 350 mm to 360 mm, the swing diameter is about 1250 to 1270 mm, and the gap between the hammer head and the shell plate of the hammer crusher is reduced from 25 mm to 15 mm. Therefore, the particle size of the material can be used, from the original 20 mm below, 25% powder, into 8-10 mm, 60% powder, greatly improving the crushing effect of the crusher, thus increasing the table yield.
4. Improved the grinding effect. After the secondary crushing of limestone and other materials, it should be studied from the energy consumption and efficiency. The crushing efficiency is higher than the grinding efficiency, and the power consumption is small. Therefore, the requirements and the hope that the limestone is more broken, less ground. The output grain size of 8-10 mm, 60% powder, greatly improve the production effect of the powder machine. Production has increased from 12 tons per hour to 16 tons per hour, reducing the production cost of raw materials.
Hot Tags: clinker crusher hammer, China clinker crusher hammer manufacturers, suppliers, factory, Clinker Crusher Hammer, Casting Wear Resistant Crusher Hammer For Mining Equipment, High Mn Steel Crusher Hammer, High Manganese Steel Hammer, Wearing Plate Hammer, Rock Crushing Hammer
