Wear Resistant Pipe Lined By Ceramic

Due to the Wear resistant pipe lined by ceramic has wear-resisting, corrosion resistant, heat resistant properties, thus can be widely used in electric power, metallurgy, mining, coal, chemical and other industries as conveying sand, stone, coal powder, ash, liquid aluminum and other material grinding particles and corrosive medium, is an ideal abrasion resistant pipe.

Ceramic lined pipes are designed to be wear-resistant and corrosion-resistant, making them ideal for applications where standard pipes would fail within a short period of time. The ceramic lining provides a smooth flow path, reducing turbulence and increasing wear resistance. The ceramic material used in the lining is extremely hard and can withstand erosive wear and high temperatures

Good wear resistance, lining ceramic composite wear resistance pipe inner layer is corundum ceramic, Mohs hardness above 9.0, equivalent to HRC 90 above, so the power, coal, metallurgy, mine transport medium have high wear resistance

 In these high wear working environment, this kind of pipe manufacturing products reflects the advantages of similar products, wear-resistant ceramic pipe inherited the characteristics of the steel pipe, due to the ceramic lining composite steel pipe play the characteristics of steel pipe, so it has a high strength, at the same time in good sex, impact resistance, welding performance continue to develop the characteristics of steel pipe.

Advantage

Super wear-resistant, high density: we use 95% of chromium corundum, 100 tons dry-pressing.

Elbows formed by hot-bending, the outside of the bending part are seamless which is wear-resistant and can prolong the service life.
Firmly bonding without pealing: we use epoxy adhesive and miss-match installation technology, so that there is no straight-seam.

High temperature and ageing resistance: we abandon the traditional organic bond, and use inorganic bond which is ageing resistance.
High pressure resistance: We use 20# seamless steel pipe, which is high pressure resistance and avoiding welding leakage.

The pipe with smooth inner wall which can make the materials flow smoothly: we use seamless steel pipes which has smooth inner wall that can reduce weariness, and the height tolerance of ceramics is below 0.5mm.

Application Guidance

Avoid welding on site, the welding layer should be 30mm above the ceramic layers; according to our experiences, if you need a shot welding (for example spot welding) or must welding, watering after welding, which will reduce the damage of adhesive layer.

Avoid striking and throwing the pipes during transportation and installation.

To achieve the best abrasion-resistant solutions, thicken ceramic liners can be used in the elbow which has serious abrasions.