Home >

News

14Oct 2023

Zirconia (ZrO2) Ceramics

Zirconium oxide (ZrO2) According to the added stabilizer (Y2O3, CaO2, MgO), yttrium stabilized zirconia, cerium stabilized zirconia, and magnesium stabilized zirconia can be obtained. Zirconia cera...
09Oct 2023

Construction Technology And Precautions For Wear-resistant Ceramic Patch Pipe

(I) Installation method 1. Clean the surface and polish and remove the dust. In order to ensure the paste effect of ceramic pieces, we need to fine polish the paste position of the pipe before inst...
07Aug 2023

Model Description Of Ceramic Wear-resistant Elbow

Fluid pipeline transmission is not only applied in the power industry, but also in metallurgy, coal, petroleum, chemical, building materials, machinery and other industries. When the pipe conveying...
24Jul 2023

Linined Plastic Steel Pipe-technical Requirements For Steel Pipe

1) The steel pipe used in the lined plastic steel pipe is hot dip galvanized steel pipe (base pipe), and the external corrosion protection of hot dip galvanized steel pipe shall comply with the wel...
24Jul 2023

Production Process Of The Lining Plastic Pipe

After many years of practical use of lining plastic pipe, directly affect the service life and stable performance, high-quality materials and advanced manufacturing technology is the quality assura...
21Jul 2023

The Difference Between Steel And Plastic Composite Pipe And Lined Plastic Ste...

1. Performance characteristics of steel plastic composite pipe: steel plastic composite pipe is referred to as steel plastic pipe, it is the steel pipe as the base material, coated with plastic mat...
21Jul 2023

Technical Requirements For Steel-plastic Composite Pipe

1. The water supply vertical pipe and basement water main pipe of this project adopt steel-plastic composite pipe, and the products shall meet the industry standards of CJ / T136-2007, and meet the...
19Jul 2023

Basic Key Points Of The Casting Process

The casting process is to make the pouring smoothly, get good casting technology, smooth and fast is the famous saying of Dr. Masantaro, that is, the pouring time should be as short as possible, an...
19Jul 2023

Casting Process Of Grey-cast Iron

Casting industry said "three good" namely: good molten iron, good sand, good technology. Casting process in the manufacture of casting is one of the three elements with molten iron, sand parallel, ...
18Jul 2023

Hydrostatic Test Of Ductile Cast Iron

1. Water injection into the pipe should be injected slowly from the downstream. During water injection, an exhaust valve should be set at the top of the pipe and the high point of the upstream of t...
18Jul 2023

Inspection Method Of Ball Grinding And Cast Iron

The hardness is tested by Brinell hardness, and it shall be noted that: (1) Thickness and width (or diameter) of the sample: the thickness of the sample shall not be less than 10 times of the inden...
13Jul 2023

Production Technology Of Directly Buried Thermal Insulation Pipe

1, feeding 2, extrusion 3, mold 4, cooling 5, traction 6, internal surface corona treatment 7, cutting 8, inspection 9, finished product A. Polyethylene pipe easy aging, such as open storage with t...

First 3 4 5 6 7 8 9 Last 6/13

News

Zirconia (ZrO2) Ceramics

Construction Technology And Precautions For Wear-resistant Ceramic Patch Pipe

Model Description Of Ceramic Wear-resistant Elbow

Linined Plastic Steel Pipe-technical Requirements For Steel Pipe

Production Process Of The Lining Plastic Pipe

The Difference Between Steel And Plastic Composite Pipe And Lined Plastic Ste...

Technical Requirements For Steel-plastic Composite Pipe

Basic Key Points Of The Casting Process

Casting Process Of Grey-cast Iron

Hydrostatic Test Of Ductile Cast Iron

Inspection Method Of Ball Grinding And Cast Iron

Production Technology Of Directly Buried Thermal Insulation Pipe